SPLACH Zippy Ultra Manual

Phone Holder Instructions

Please read the following instructions before using the SPLACH Zippy Ultra phone holder.

Charging the Phone Holder

• Before first use, connect the phone holder to a power source using a USB-C charging cable.
• The phone holder contains a built-in battery that powers the touch sensor and motorized clamping arms. Charge the phone holder periodically to ensure that the clamping arms continue to open and close properly.
• When the phone holder battery is fully depleted, the touch sensor and clamping arms will not operate until the holder is connected to power.
• When the detachable power bank is installed in the phone holder, connecting the holder to power can also charge the power bank. The power bank may also be removed and charged separately through its USB-C port.

Installing the Phone Holder

• Attach the phone holder to the appropriate SPLACH Zippy Ultra accessory mount included in your kit.
• Make sure that the phone holder and mount are securely connected before placing your phone in the holder. Installation methods vary depending on the selected mount. Refer to the corresponding mount instructions for installation details.

Placing Your Phone in the Holder

1. Touch the finger-icon sensing area located near the upper center of the back of the phone holder. The clamping arms will open automatically.
2. Place your phone in the center of the holder. The clamping arms will close automatically and secure the phone.

Wireless Charging

Wireless charging is provided by the detachable power bank, not by the phone holder itself.

To charge your phone wirelessly, make sure that:

• The power bank is correctly installed in the phone holder.
• The phone supports Qi wireless charging.
• The phone is aligned with the wireless charging area of the power bank.
• There are no metal objects, cards, or other foreign materials between the phone and the power bank.

Charging performance may vary depending on the phone model, phone case, alignment, operating temperature, and current phone usage.

Removing Your Phone

Touch the finger-icon sensing area near the upper center of the back of the phone holder. The clamping arms will open automatically, allowing you to remove the phone.

Using the Holder Without an External Power Connection

• The phone holder can operate without being continuously connected to an external power source as long as its built-in battery has sufficient charge.
• If the clamping arms do not respond, connect the phone holder to a power source and allow it to charge before trying again.

Power Bank Instructions

Please read the following instructions before using the SPLACH Zippy Ultra detachable power bank.

Charging the Power Bank

The power bank can be charged in either of the following ways:

• Install the power bank in the SPLACH Zippy Ultra phone holder, then connect the holder to a power source using a USB-C charging cable.
• Remove the power bank from the holder and charge it directly through its USB-C port.

Use a compatible USB-C charging cable and USB power adapter.

The battery level indicator shows the remaining battery level while the power bank is charging or in use.

Installing the Power Bank into the Phone Holder

1. Hold the power bank with its charging contacts facing downward, and align the contacts with those inside the phone holder.
2. Insert the bottom edge of the power bank into the lower part of the power bank compartment and press it into place.
3. Press the top of the power bank inward until it is fully seated in the phone holder.
4. Make sure the power bank sits flush within the compartment and is securely held in place.

Removing the Power Bank from the Phone Holder

1. Grip both sides of the power bank through the removal grooves on the phone holder.
2. Gently pull the top of the power bank outward to release it from the compartment.
3. Lift the power bank away from the phone holder.

Do not forcefully pull, twist, or pry the power bank, as this may damage the power bank, phone holder, or charging contacts.

Wireless Charging

Magnetically attach the power bank to a compatible wireless-charging phone and align it with the magnetic alignment ring. The power bank will turn on automatically and begin wireless charging.

While the power bank is attached to the phone, press the power button twice to turn it off and stop wireless charging. Press the power button once to turn it back on and resume charging.

Wireless charging performance may vary depending on the phone model, phone case, alignment, battery level, operating temperature, and current phone usage.

Remove metal objects, cards, keys, coins, magnetic accessories, or other foreign materials from between the phone and the power bank before charging.

Wired Charging

Connect a compatible device to the USB-C port using a USB-C charging cable.

The USB-C port supports wired charging up to 20 W when used with a compatible device and cable.

Actual charging speed depends on the connected device, cable, charging protocol, battery condition, and operating temperature.

Power Button and Battery Level

• Press the power button once to turn on the power bank and display the remaining battery level.
• Press the power button twice to turn off the power bank.
• When the power bank is magnetically attached to a compatible wireless-charging phone, it will turn on automatically and begin charging.

Using the Power Bank Separately

The power bank can be removed from the phone holder and used as a standalone wireless or wired charger.

When carrying the power bank separately, keep the charging contacts and USB-C port clean and dry.

Mount Installation and Use Videos

Watch the following videos for step-by-step instructions on how to install, adjust, and use each SPLACH Zippy Ultra mount.

Mount Installation and Use Videos

Watch the following videos for step-by-step instructions on how to install, adjust, and use each SPLACH Zippy Ultra mount.

All About the Details

Specifications

SPLACH Zippy Ultra

Power Bank

Direct-Connect Mounts

These mounts connect directly to the SPLACH Zippy Ultra phone holder through a standard 17 mm ball joint.

Supporting Accessories

These accessories provide additional mounting or charging functionality. The Tripod requires the Ball Joint to connect to the SPLACH Zippy Ultra phone holder.

Accessory Dimensions

Accessory Name / Folded Dimensions

1. Metal Screen Mount / 90 × 90 mm
2. Crab Claw Handlebar Mount / 80 × 76 mm
3. Clamp-Style Vent Mount / 65 × 50 mm
4. Magnetic Mount / 67 × 42 mm
5. Ball Joint / 48 × 58 mm
6. Tripod / 128 × 30 mm
7. Hanging Charging Cable / 85 × 15 mm

What's in the Box?

Safety Information

General Safety

• Read all instructions before using the product.
• Use the product only for its intended purpose and in accordance with this manual.
• Keep the product out of reach of children. This product is not a toy.
• Do not disassemble, modify, repair, puncture, strike, crush, bend, or drop the phone holder or power bank.
• Do not insert foreign objects into the USB-C port, charging contacts, power bank compartment, or other openings.
• Use only compatible charging cables, power adapters, and accessories that meet the electrical specifications stated in this manual.
• Do not use damaged cables, adapters, connectors, mounts, or accessories.

Battery and Power Bank Safety

• Do not expose the power bank to fire, open flames, sparks, or other ignition sources.
• Do not dispose of the power bank in fire or a household waste container.
• Do not use or charge the power bank if it is swollen, deformed, cracked, leaking, punctured, or otherwise damaged.
• Stop using the power bank immediately if it produces an unusual odor, smoke, liquid leakage, abnormal noise, or excessive heat.
• Disconnect the power bank from all devices and power sources if any abnormal condition occurs.
• Do not attempt to open, repair, compress, or flatten a swollen power bank.
• Dispose of the power bank through an authorized battery or electronic-waste recycling facility.

Heat and Charging Environment

• Charge and use the product in a dry, open, and well-ventilated area.
• Place the power bank on a hard, stable, and heat-resistant surface while charging.
• Do not charge the power bank under pillows, blankets, clothing, or inside enclosed bags or containers.
• Do not cover the power bank or phone holder while charging.
• Keep the product away from direct sunlight, heaters, cooking appliances, and other heat sources.
• Do not leave the product inside a parked vehicle or other location where temperatures may become excessively high.
• Do not use the product when its temperature exceeds 58°C / 136°F.
• If the product becomes excessively hot, disconnect it and allow it to cool completely before further inspection or use.
• Do not place the product in a refrigerator, freezer, water, or other liquid to cool it.

Water and Moisture

• The phone holder and power bank are not waterproof.
• Do not expose the product to rain, water, excessive moisture, condensation, or other liquids.
• Do not handle the power bank, USB-C cable, or charging contacts with wet hands.
• Do not charge or use the product if it has been immersed in water or if liquid has entered the USB-C port or charging contacts.
• If the product becomes wet, disconnect all power sources and stop using it. Do not attempt to charge or power it on.

Wireless Charging Safety

• Remove metal objects, coins, keys, cards, magnetic strips, and other foreign materials from between the phone and the power bank before wireless charging.
• Do not place credit cards, identification cards, access cards, or other magnetically sensitive items between the phone and the power bank.
• Make sure the phone is properly aligned with the wireless charging area before charging.
• If wireless charging repeatedly starts and stops, remove the phone, inspect the charging surface, and check the phone case and alignment before trying again.
• Thick, metallic, uneven, or incompatible phone cases may reduce charging performance or cause excessive heat.
• Stop wireless charging if the phone, case, or power bank becomes excessively hot.

USB-C Charging Safety

• Confirm that the charging cable and power adapter are compatible with the input and output specifications listed in this manual.
• Do not force a connector into the USB-C port.
• Keep the USB-C port and charging contacts clean and dry.
• Disconnect the cable by holding the connector, not by pulling on the cable.
• Stop using the cable or power adapter if it becomes damaged, loose, discolored, or excessively hot.
• Do not allow conductive materials or metal objects to contact the USB-C port or charging contacts.

Phone Holder and Motorized Arms

• Keep fingers, hair, cables, and other objects clear of the motorized clamping arms while they are opening or closing.
• Do not manually force the clamping arms open or closed.
• Do not place a phone in the holder if the clamping arms, bottom supports, or mounting components are damaged.
• Make sure the phone is centered and securely clamped before use.
• Support the phone with one hand before opening the clamping arms to remove it.
• If the clamping arms do not respond, connect the phone holder to power and allow it to charge before trying again.
• Do not pry the clamping arms apart when the holder battery is depleted.

Installation and Vehicle Use

• Install the product only in a location that does not obstruct the driver’s view, vehicle controls, displays, mirrors, airbags, or safety equipment.
• Do not install, adjust, remove, or operate the product while driving or riding.
• Before driving or riding, verify that the phone holder, power bank, phone, ball joint, and accessory mount are securely attached.
• Check all mounting components regularly and retighten or reposition them if they become loose.
• Do not use the product on damaged, unstable, excessively thin, or incompatible mounting surfaces.
• Remove the product if excessive vibration, movement, or loosening occurs.
• Follow all applicable traffic laws regarding mobile-device mounting and use.
• Road vibration, impacts, extreme temperatures, and improper installation may reduce mounting stability.

Storage and Maintenance

• Store the product in a cool, dry, and well-ventilated location.
• Do not store the power bank while fully depleted for an extended period.
• When storing the product for a long period, recharge the power bank periodically.
• Inspect the power bank, phone holder, charging contacts, USB-C port, and mounting components before use.
• Clean the product with a soft, dry cloth.
• Do not use abrasive cleaners, alcohol, solvents, or harsh chemicals.
• Keep the charging contacts free from dust, dirt, oil, and metallic debris.

Air Travel

• Power banks must be carried in carry-on baggage and must not be placed in checked baggage.
• Protect the USB-C port and charging contacts from short circuits during transport.
• Check the applicable airline and aviation authority requirements before traveling.
• Do not use or charge the power bank when prohibited by the airline.

Stop Use Immediately If

Stop using the product immediately and disconnect it from all devices and power sources if any of the following occurs:

• The power bank becomes swollen, deformed, cracked, punctured, or damaged.
• Liquid leaks from the product or enters the USB-C port or charging contacts.
• The product produces smoke, an unusual odor, or abnormal noise.
• The product becomes excessively hot during charging, use, or storage.
• The USB-C port, cable, charging contacts, or casing becomes discolored, melted, or burned.
• The product has been immersed in water or exposed to significant moisture.
• The power bank does not remain securely installed in the phone holder.
• The motorized clamping arms operate abnormally, become stuck, or make unusual mechanical sounds.
• The mount, ball joint, or other structural component becomes loose, cracked, or unstable.

Do not resume use until the product has been inspected or replaced. Do not attempt to repair the product yourself.

Limited Warranty

Warranty Coverage

SPLACH warrants the SPLACH Zippy Ultra Charging Core, consisting of the phone holder and detachable power bank, against defects in materials and workmanship under normal use for a period of six (6) months from the original date of purchase.

This limited warranty applies only to the SPLACH Zippy Ultra Charging Core. Accessory mounts, cables, adhesives, and other accessories are not covered.

To obtain warranty service, valid proof of purchase or order information may be required.

Warranty Exclusions

This limited warranty does not cover damage or malfunction resulting from:

• Water, rain, liquid ingress, immersion, condensation, or excessive moisture;
• Use, charging, or storage above 58°C / 136°F;
• Drops, impacts, crushing, excessive vibration, external force, or improper transportation;
• Misuse, improper installation, unauthorized modification, disassembly, or repair;
• Incompatible or defective cables, power adapters, devices, mounts, or accessories;
• Normal wear, scratches, cosmetic damage, discoloration, or deterioration;
• Normal reduction in battery capacity or charging performance over time.

Obtaining Warranty Service

If you experience a problem that may be covered by this warranty, contact SPLACH Customer Support and provide your order information, a description of the issue, and clear photos or video showing the problem.